Trim 3.2 meters; 3.2 Meter Wide Celli "Combi" Rewind
Model AC814 RA/Rapporto 814 707
The rewind machine was originally installed in 1998 and was originally intended to slit and rewind jumbo production rolls onto 3 or 6 inch core quality roll goods.
This machine is currently in drop-in condition and all associated equipment is in good condition. Unit should have computer Up-graded.
Support systems (instrument air, water, building ventilation, etc) are not included.
Rewind System
Parent Roll
3.3 Meter (130 inch) maximum reel width
Surface Driven Unwind
1524mm (60 inch) maximum parent roll diameter
500mm (19.6 inch) minimum parent roll diameter
1219m/min line practical line speed (4000 ft/min) - (1500 meters per minute mechanical line speed)
10 to 100 g/m2 web weight
Thread speed adjustable down to 10m/min
76.2mm (3 inch) and 152mm (6 inch) cores
Finished Roll
1300mm (51 inch) maximum finished roll diameter
60mm (2.4 inch) minimum slit roll width
(41) Tangential shear slit knives and anvils
Windows driven "Slitt-o-matic" automatic knife positioning system
Web Tension
Fully automatic taper tension control
Hot splicing system
Minimum web tension = 50N/m
Maximum web tension = 300N/m
Right hand drive side
Controls
Allen Bradley SLC500 controls
AB 1336 - AC Vector Motors and drives
1336 dynamic brakes
600 amp/480vac switch gear
Automatic Handling Roll System
Handles auto-off rolls for transfer and labeling
3 ton Jumbo Roll Hoist Included/No Uprights
Information & Drawings on File
Featured Item
;)
;){kind=small}
;)
;)
;){kind=small}
;)
;)
;)
;){kind=small}
